I had one of those moments of inspiration yesterday followed by the sewing addiction and sleepless hours in front of the machine. You know those moments? I’m sure all of us sewing addicts have them often.
My sister in law visited us this weekend and she is always very stylish. She wore a breezy light cotton, had a band a woven band around the neckline, the fabric was gathered on this band.
if A -> B -> C then A -> C
woven band -> crochet collar
light breezy cotton -> embroidered cotton gauze
There I was putting the pieces of the puzzle together, pinning the fabric on the dress form, marking, cutting and sewing till after midnight. The collar was already crochet just looking for a match.
The whole top is underlined using the same fabric, the fabric is cut in a double layer so it eliminates the sheerness. The helped a lot with the finishing of the seams, the right side was first sewn to the underlining at the neckline and armholes, for front then the same for the back. A topstitch seam creates a nice finish and keeps the underlining from rolling up to the right side. The back has a cut in the center, the lining and underlining were sewn together, just like when you are working with a facing, but this time the facing is as long as the top.The side seams are sewn like a tube, the underlining side seams and then the top’s side seams all in one long seam. Turn everything to the right side, sew the crochet part onto the top. Sew a little further away from the crochet’s edge, I like to leave the edge of the crochet hang freely over the fabric, so the seam doesn’t even show. Or it can be attached by hand…but I’m too lazy.
I didn’t know what to do with the hem, since I had two layers of fabric now. I had the chose of cutting the top layer shorter and let the bottom layer visible, but I sewed them together over a folded band.
The next morning I woke up to wear my breand new top 🙂 Thanks Ioana for the inspiration.
Oh, and I did it all by draping on the dress form, no pattern for the crochet part either. It has matching pineapple earings to go with it! Photos pending of course.
My fabrics are nicely packed inside a box that arrived the same morning from the Rocky Woods online store.
Just waiting to be cut.
The others are the UV protection fabrics for the shirts. The red and green are a little fuller but will be great for the long sleeved versions, the plaid ones are very soft to the touch and thinner, looking forward to sewing those. The colors for me are not really muted, red and pink, but oh well…why not be a little girlie…even if it is sports wear.
I wish that Rocky Woods would have better pictures of the actual fabric, like the fashion fabrics club has. That would make the whole buying stuff online an easier choice. They do offer samples, I just didn’t want to wait that long.
Now I have to carefully choose a pattern for the softshells and already have some patterns in mind for the shirts.
I do need more advice on the seam sealing process. Will the seam tape that is ironed on hold over the fleece backing? Will the SeamGrip work? hmm….
after some more reading…I found this link that explains a lot about sealing and seaming http://www.bushwalking.org.au/FAQ/DIY_RNCSeams.htm
Updated: After all the research, I decided to call Rocky Woods, actually spoke to a nice person, no robots, and she told me that the iron on tape will probably peel off from the fleece backside, as I suspected. I will try the shoe goo on a scrap piece, since I already have that at home and they say it is similar to SeamGrip. If that doesn’t work either, I will simply sew a double seam, maybe a french like seam…that will also look good on the inside if it is not too bulky, or use some bias tape, maybe reflective…or who knows, I’ll play a little with the scraps…
P.S. After everything is sewn, here is how to take care of it:
How to sew outdoor fabrics: